The special inks designed by the inkjet printer are all for the model function of the printer. The composition of the ink itself is also relatively complicated, and generally has a faster coagulation ability and a good adhesion ability during use. The cleaning agent of the printer is used to clean the ink of the body during the use of the ink to prevent ink condensation on important parts such as nozzles and ink pipes. When using the cleaning agent in the printer, there are mainly the following situations. Rinse the ink. This method is mainly for cleaning parts that are partially contaminated with ink. Just use the detergent bottle, align the parts to be cleaned, rinse repeatedly, and drain. Soak and wash. This is a thorough cleaning for some parts of the ink. For example, the nozzle of the printer, the vicinity of the recovery tank, and the like. Soaking allows the ink to dissolve sufficiently and return to a good condition. Need to find a container, the poured component can submerge the parts, soak for a few minutes. Internal looping. Mainly used in the cleaning of the ink pipe of the printer. Lightly clean and pour less components, need to be cleaned, pour more, and then let the printer start normally, you can complete the cleaning target of the printer. The use of cleaning agent has a great influence on the marking quality of the printer. It is recommended to use it correctly during the use of the printer. Article by: Foshan inkjet printer Yucheng Packaging Equipment Co., Ltd. provides the arrangement, this view does not represent the viewpoint of this site
